The AJ Ceiling, Micro-T grid system is designed for carrying the load of standard filter modules in ISO 4 (Class 10) to ISO 8 (Class 100,000) Cleanroom areas for various industries including but not limited to Aerospace, Biotechnology, Health Care, Microelectronic, Pharmaceutical, Semiconductor, etc. The Micro-T is a gasket-seal ceiling grid system comprised of 2″ (50mm) wide extruded aluminum tee grid members that are bolted together forming a continuous gasketed ledge to receive HEPA or ULPA filters for ultra-clean environments. This ceiling grid system is suspended using ⅜-16 threaded rod with turnbuckles. Each Micro-T grid member comes factory pre-cut. The Micro-T main ‘4-way’ connectors are designed for all 4-way intersections. These ‘zinc die-cast’ connectors can be cut to make other grid connectors used at a splice, three-way, inside corners, outside corners, and outside-edge-perimeter connections. The connectors are mounted from the top to the Micro-T grid, which interconnects to the top threaded boss with ¼-20 hardware. The ‘zinc die-cast’ connector has been specially designed to engage with the top upper area of the main runners and cross-tee sections for accurate grid alignment. All Micro-T grid intersections are designed for straight cuts to facilitate ease of construction on the job site.
Micro-T Grid System was last modified: October 20th, 2025 by